Page 11 of 14
Re: SCG-ATC / Automatic Transmission Controller
Posted: Sat Feb 23, 2019 8:27 pm
by dvjcodec
Please contact me on PM about 7226 controller.
Re: SCG-ATC / Automatic Transmission Controller
Posted: Fri Mar 08, 2019 4:43 pm
by Dziku
ryan_pajero-io wrote: ↑Thu Feb 21, 2019 11:46 am
Is fully automatic mode available now?
Up, will it avaible full auto for aw4, a340 or a4ld/4r44 etc?
Re: SCG-ATC / Automatic Transmission Controller
Posted: Thu Mar 14, 2019 3:36 pm
by Piotr
Is atmega have to be programmed before soldering or it can be done after ?
Re: SCG-ATC / Automatic Transmission Controller
Posted: Thu Mar 14, 2019 4:04 pm
by dazq
Piotr wrote: ↑Thu Mar 14, 2019 3:36 pm
Is atmega have to be programmed before soldering or it can be done after ?
I soldered mine in place then loaded the bootloader. With the bootloader installed , uploading firmware via Arduino IDE is same as normal mega2560 board.
Re: SCG-ATC / Automatic Transmission Controller
Posted: Thu Mar 14, 2019 5:53 pm
by Piotr
Thx dazq. I trying build it for zf 8hp70, is it possible?
Re: SCG-ATC / Automatic Transmission Controller
Posted: Sun Mar 17, 2019 12:35 pm
by dvjcodec
U need more Mosfet's outs for selenoids. SCG-ATC haveonly 8 pcs.
Re: SCG-ATC / Automatic Transmission Controller
Posted: Sun Mar 17, 2019 12:55 pm
by dvjcodec
PCB on sale. 3pcs SCG-ATC 1.0 and 4pcs SCG-ATC 2.0
Re: SCG-ATC / Automatic Transmission Controller
Posted: Mon Mar 18, 2019 3:07 pm
by Mr_Hypnotic
Very exciting!
Re: SCG-ATC / Automatic Transmission Controller
Posted: Mon Mar 18, 2019 7:28 pm
by Piotr
dvjcodec wrote: ↑Sun Mar 17, 2019 12:35 pm
U need more Mosfet's outs for selenoids. SCG-ATC haveonly 8 pcs.
Is it any chance to wired up one more mosfet onto this board?
Re: SCG-ATC / Automatic Transmission Controller
Posted: Mon Mar 18, 2019 9:05 pm
by dvjcodec
Why not. U can add an external Mosfet and use free pins from Mega2560