For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By daChurchPcGuy
#17414
Has anyone used a MegaSquirt® Stimulator to test their Speeduino? I have one laying around somewhere, along with an unassembled Megasquirt kit.
User avatar
By PSIG
#17425
+1 I've used an old MS Stim v1/2 (pre-JimStim) from 2004 :shock: and it also works fine. I used 90° header pins to clip-up. The info page is here for anyone that wants to breadboard a circuit or two for quick testing, or search our forums for various simulator designs for Speeduino.

David
MS Stim v1-2.jpg
MS Stim v1-2.jpg (8.42 KiB) Viewed 6681 times
By VWSam00Cleveland
#17463
daChurchPcGuy wrote: Thu Mar 23, 2017 2:07 am Has anyone used a MegaSquirt® Stimulator to test their Speeduino? I have one laying around somewhere, along with an unassembled Megasquirt kit.
Do you still have this kit laying around ?
By ker0
#17684
I use a JimStim to test my Speeduino v0.4.1

Works like a champ, just takes a while to setup as you have to connect everything 1 by 1. I am intending to make a db37 to IDC adapter to make it plug and play, would be so much easier for quick connecting.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?