Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
By romP44
#45939
Trigger filter - A time based software filter that will ignore crank/cam inputs if they arrive sooner than expected based on the current RPM. The more aggressive the filter, the closer to the expected time the filter will operate. Higher levels of filtering may cause true pulses to be filtered out however, so it is recommended to use the lowest setting possible
It is a software filter, not really a frequency filter.
  • 1
  • 5
  • 6
  • 7
  • 8
  • 9

Here are wiring diagrams for three Ch(203 or 209) […]

Ok, you can't bypass the 5v regulator, it must hav[…]

Modified 3 cylinder

You should read up on how OEM go about shutting do[…]

Gauge output options? (0.4.4C Board)

At the moment only teensy natively supports th[…]

Still can't find what you're looking for?