For any add-on boards such as VR conditioners, optos and OEM interface boards
By caldina3sgte
#41053
Hello,

Teensy 3.5 with teensy adapter v1.0
02/2020 firmware
4.3c board

No fuel pump trigger when ignition turned on even on cranking. Do i need to modify or jumper something in the teensy adaptor?
By caldina3sgte
#41071
pazi88 wrote:Do you have any circuitry installed for controlling fuel pump relay? Like ULN?
Hi Pazi,

Yes i have. actually everything is working fine with the mega 2560, when i switched to teensy 3.5 the fuel pump won't turn on.

I tried also swapping with a different teensy 3.5 but same issue, fuel pump won't trigger but when cranking it detects the rpm and fires the coils it just won't start because fuel pump isn't triggering
By caldina3sgte
#41080
LPG2CV wrote:Expect you've done this . ignition on, does your fp work if you gnd the fp relay?
Hello LPG2CV,

Yes FP working on ignition and grounding the FP relay trigger.

When mega 2560 is everything works flawlessly. When teensy is inserted FP won't trigger.

Also tried EEPROM_CLEAR and re uploading firmware to teensy 3.5, still FP won't trigger

Another question, with the Max9926 conditioner i c[…]

AE below 1000RPM

The problem mainly is that the MAP value update[…]

You certainly can, and why it's important with a v[…]

AE in PW Adder mode not done?

Thanks !

Still can't find what you're looking for?