For anything related to the 'official' Speeduino boards (Eg v0.3, v0.4 etc)
By Nielamyburgh
HI guys. AS of today i am only learning about speeduino for the first time. I am sitting with a blown ecu for a jet ski.
The engine is a 1500 4 stroke 3 cylinder. What board will i Need that will work on my application.
Any advice would be greatly appreciated and thank you in advance. :mrgreen:

Ahhh yes! @PSIG I didn't realize those were nearly[…]

It's difficult to see each signal, but the trace[…]

Crank to Run Taper

I did not write this correctly. I should have said[…]

@JHolland - I have seen variable input/output dela[…]

Still can't find what you're looking for?