For anything related to the 'official' Speeduino boards (Eg v0.3, v0.4 etc)
By nrojas
#58967
Hello,

Hope I posted this in the right forum.......

First question about my board, I ordered the V.0.4.3 board in this picture:
Image

This is the board I got, is this an updated version or revision?
Image

No big deal I hope, just wondering.

Second question is regarding the second picture, the part that is circled in red, is this section just pins? Haven't been able to find my exact board so haven't been able to figure it out.

I already have my board pretty much assembled, currently working on the harness, just didn't post it because my soldering is ugly as sin lol. Any assistance would be greatly appreciated.

Thanks!

Noel
Running a k24a2 w/o a chassis

Good point! I guess for starters, is there a trigg[…]

Have you tried Missing Tooth (crank) as a 2-1 wh[…]

BMW E23 M30B28

The issue got worse recently. From the logs I can […]

Cool. 8-) Yes, it's actually simple to do basic[…]

Still can't find what you're looking for?