Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For anything related to the 'official' Speeduino boards (Eg v0.3, v0.4 etc)
By FX16
i'm searching for schematics for my PNP MX5 V1.2 Board. I was on the GitHub page but I only find some for the V1.1 or sooner.
Does anyone can give me the informations where I can find the right schematics?

Thank You :)
By FX16
So here is a pic of the board. :)
Speeduino V1.2
20210609_234115.jpg (1.19 MiB) Viewed 1313 times

for hall the VR1+ should read +5 volts. VR1- is no[…]

Jaguar V12 second edition

I believe more and more on a software issue. Speed[…]

You should be able to use PWM using the VVT tabl[…]

retroject flooding

sounds like you might have some pin misconfigurati[…]

Still can't find what you're looking for?