Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any general discussion around the firmware, what is does, how it does it etc.
By theonewithin
#51149
You probably have it connected incorrectly.

Or you have set the wrong board in TunerStudio in Engine Constants.

CLT and IAT go to ground and sensor input.

logs are going to be needed. Zip them :) the inje[…]

12V hall sensor

http://i.imgur.com/CdNYxlU.gif?1 Note in that W[…]

no spark

at tdc my crank sensor is in the centre of the mis[…]

PCB for BMW m52 engine

A few posts ago Pazi mentioned the VSS input optio[…]

Still can't find what you're looking for?