Any general discussion around the firmware, what is does, how it does it etc.
By theonewithin
#51149
You probably have it connected incorrectly.

Or you have set the wrong board in TunerStudio in Engine Constants.

CLT and IAT go to ground and sensor input.

It looks like you have a fuel supply issue. readin[…]

Will this have an updated version about this featu[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?