Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any general discussion around the firmware, what is does, how it does it etc.
By theonewithin
#51149
You probably have it connected incorrectly.

Or you have set the wrong board in TunerStudio in Engine Constants.

CLT and IAT go to ground and sensor input.
Jaguar V12 second edition

I believe more and more on a software issue. Speed[…]

You should be able to use PWM using the VVT tabl[…]

retroject flooding

sounds like you might have some pin misconfigurati[…]

As above. Check the schematic whenever you are uns[…]

Still can't find what you're looking for?