[JRockland]

I'm working on a custom board and need to make some changes, I can't seem to find the current layout file "dvjcodec teensy RevB"
I know how to add my own to TunerStudio but I can't seem to find the original file so I can branch from it...

Basically I need to change some IO location.

Thank !

[theonewithin]

Wrong section of the forum.

Also did you try sending the maker a message directly?

Pretty sure they are here on the forum.

Also a link or 2 to exactly what you are working in would be good as I have no idea what that board is.

It's not an official board or one of the recognised 3rd party ones.

memberlist.php?mode=viewprofile&u=1660

[JRockland]

Wrong section of the forum.

Also did you try sending the maker a message directly?

Pretty sure they are here on the forum.

Also a link or 2 to exactly what you are working in would be good as I have no idea what that board is.

It's not an official board or one of the recognised 3rd party ones.

memberlist.php?mode=viewprofile&u=1660

It is an official one, well it is in the last Speeduino firmware list.. (in engine constant/board layout) thank for the link Ill try to reach him

[theonewithin]

It's not an official board.

The official boards are the 0.3 and 0.4 along with a couple of MX-5/Miata PNP's.

All others are 3rd party.

Just because the .ini has an option for it doesn't mean anything.

[woozyinfinity]

Thanks. I got it!
foodle