- Sun Mar 21, 2021 4:56 am
#49183
Morning all!
I had a search and found something similar to what I need to know, but I just want to make sure I have this correct in my head
So, installed speeduino yesterday, started on first turn of the key, diamond.
However I forgot that I hadn't changed my timing on the CAS back to 10 degrees BTDC.
It is currently set at 14 BTDC .
To adjust this. Would I be best of locking the timing at 10 within tunerstudio. Then adjusting the CAS back down to 10BTDC? Or is there a more preferred method from within the ECU?
I had a search and found something similar to what I need to know, but I just want to make sure I have this correct in my head
So, installed speeduino yesterday, started on first turn of the key, diamond.
However I forgot that I hadn't changed my timing on the CAS back to 10 degrees BTDC.
It is currently set at 14 BTDC .
To adjust this. Would I be best of locking the timing at 10 within tunerstudio. Then adjusting the CAS back down to 10BTDC? Or is there a more preferred method from within the ECU?