[Jdmtom]

Morning all!

I had a search and found something similar to what I need to know, but I just want to make sure I have this correct in my head

So, installed speeduino yesterday, started on first turn of the key, diamond.

However I forgot that I hadn't changed my timing on the CAS back to 10 degrees BTDC.

It is currently set at 14 BTDC .

To adjust this. Would I be best of locking the timing at 10 within tunerstudio. Then adjusting the CAS back down to 10BTDC? Or is there a more preferred method from within the ECU?

[LPG2CV]

Hi
That's correct.

[Jdmtom]

Hi
That's correct.

Thanking you!

So just to get this right in my head.

Start car, lock timing to 10, adjust CAS on car until it shows 10 on cam pulley?

After I have done this. And unlocked the timing. Should the idle timing match the spark table?

[theonewithin]

Yup