Any general discussion around the firmware, what is does, how it does it etc.
#48957
Hi folks!

Mi car has a very specific crank trigger and no camshaft sensor. It's almost exactly the same as the subaru 6/7 trigger, exact same angles, but it has an extra tooth at a 5° angle.
I've modified the subaru 6/7 trigger by adding the extra tooth angle and changing a few numbers, but it looks like the code does not know how to identify tooth #1 ! and ignition is sometimes very off and jumpy, except sometimes when by chance the timing is perfect.

The RPM reading is always accurate, so I don't know what I am missing.

Any ideas would be greatly appreciated.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?