- Thu Mar 11, 2021 5:49 pm
#48957
Hi folks!
Mi car has a very specific crank trigger and no camshaft sensor. It's almost exactly the same as the subaru 6/7 trigger, exact same angles, but it has an extra tooth at a 5° angle.
I've modified the subaru 6/7 trigger by adding the extra tooth angle and changing a few numbers, but it looks like the code does not know how to identify tooth #1 ! and ignition is sometimes very off and jumpy, except sometimes when by chance the timing is perfect.
The RPM reading is always accurate, so I don't know what I am missing.
Any ideas would be greatly appreciated.
Mi car has a very specific crank trigger and no camshaft sensor. It's almost exactly the same as the subaru 6/7 trigger, exact same angles, but it has an extra tooth at a 5° angle.
I've modified the subaru 6/7 trigger by adding the extra tooth angle and changing a few numbers, but it looks like the code does not know how to identify tooth #1 ! and ignition is sometimes very off and jumpy, except sometimes when by chance the timing is perfect.
The RPM reading is always accurate, so I don't know what I am missing.
Any ideas would be greatly appreciated.