[el_fela]

Hi folks!

Mi car has a very specific crank trigger and no camshaft sensor. It's almost exactly the same as the subaru 6/7 trigger, exact same angles, but it has an extra tooth at a 5° angle.
I've modified the subaru 6/7 trigger by adding the extra tooth angle and changing a few numbers, but it looks like the code does not know how to identify tooth #1 ! and ignition is sometimes very off and jumpy, except sometimes when by chance the timing is perfect.

The RPM reading is always accurate, so I don't know what I am missing.

Any ideas would be greatly appreciated.

[el_fela]

OK, I think i get it; I don't have a cam sensor, so that is why this trigger has an extra teeth. I have to tell the decoder that the extra tooth is 15° after tooth #1. How can I do that?

[theonewithin]

The Subaru pattern doesn't work.

Join slack for help with this. That is where you will find active developers who may be able to help.

[runis6]

Hello!

Best option for me was to make something like this in home, it is not so hard to do.

Reinis.

[miker]

I'm having a look at making the decoder (via discussion on slack). Got an early version of the code I'm working through now.