Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any general discussion around the firmware, what is does, how it does it etc.
By subzero
on my scg ecu v1 i define the pins to init .ino and select the board as ecuteen rev b
ignition 1 and 2 outpouts no working plus injectorstop to work after 1 min on stimulator..someone resolve he isues
@dvjcodec ?noisymime?someone can help
By dazq
Subzero if you have a fix for the issues,submit a pr ...
By dazq
subzero wrote:
Mon Dec 14, 2020 2:34 pm
what it means
Pull request on GitHub
Fuel load calculation

Starting to look at the injectors properly now tha[…]

Kawasaki Concours 2.0

Having second thoughts about cutting a hole in my […]

I finally think I have almost crossed another hurd[…]

Weird TPS+voltage problem

it could be corruption in the tune. Can I suggest[…]

Still can't find what you're looking for?