Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any general discussion around the firmware, what is does, how it does it etc.
User avatar
By Yoosyn
Updated! I've calibrated sensors. Seems to work really smooth. I think even small bogging/misfire at certain RPM have gone :D
One question:
How to setup new AE mode "PW adder"? For example 20% added will translate to how much? 2ms, or 20% of req fuel?
ECU for my Three Wheeler Project

Hi Maverick As you said, you should be ok with […]

Sharing of tunes is NOT recommended. Different fi[…]

Trigger wheel setup help please

Wire it for semi-sequential. That way if you add […]

36-3 (ish) trigger wheel

Thanks again.

Still can't find what you're looking for?