Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any general discussion around the firmware, what is does, how it does it etc.
User avatar
By Broke4speed
#44922
I see it's available, but the usual 'new firmware' post is missing. Is there a changelog somewhere? :)
By 82rage
#44930
You can read here
Attachments
IMG_20200823_102045.jpg
IMG_20200823_102045.jpg (678.32 KiB) Viewed 1116 times
By noisymime
#44940
I'm getting there guys, just been jumping from one thing to the next lately. The proper announcement will come out later today with a few missing details added to the Github release page as well.
By criscecconello
#44991
Hi Guys,

I use the full sequential, 4 cylinders, injector and spark, when I uploaded the new firmware the ignition 3 and ignition 4 stopped, when I returned to the previous firmware, 202005, the system return to work, I don´t know if I do some mistake or have some problems in code. I use Teensy 3.5.

Thanks
By pazi88
#44993
Check programmable outputs, WMI feature and VSS input that there isn't anything there preventing those outputs from working.
By theonewithin
#44998
You are not the first to have an issue on the Teensy.

I would say wait for now before updating as Josh hasn't validated everything on the Teensy as yet...
By criscecconello
#45007
Hi,

Today I remembered to do enable test output.

I tested before the code 202005 and all ignition worked.

After I repeat the test with new firmware and the problem persists, only ignition 1 and 2 works, ignition 3 and 4 are off all time.

Thanks

Thank you all for your input I have the simulator[…]

ECU for my Three Wheeler Project

Hi Maverick As you said, you should be ok with […]

Sharing of tunes is NOT recommended. Different fi[…]

Trigger wheel setup help please

Wire it for semi-sequential. That way if you add […]

Still can't find what you're looking for?