Any general discussion around the firmware, what is does, how it does it etc.
By noisymime
#31442
So a few of you may have seen this over on Facebook or Slack, but I've been putting together a tool to help simplify the process of loading firmware onto an Arduino. SpeedyLoader will load a list of all the available firmwares when it starts, then it will download and install this with just a few clicks. No need to do scary things like install IDEs, load code up etc.

SpeedyLoader will be the default, recommended way of installing the firmware going forward as I think it's the best option for most users. Of course there will still be the ability to compile and install from source, exactly the same as you can do today, but this will really only be required if you're wanting to make changes.

I've just released the v1.0 version of SpeedyLoader (after a few Alpha/Beta testing rounds, with big thanks to all who helped out with this) and links to these for each platform are below:

Windows: https://github.com/noisymime/SpeedyLoad ... .1.0.0.exe
Mac: https://github.com/noisymime/SpeedyLoad ... -1.0.0.dmg
Linux: https://github.com/noisymime/SpeedyLoad ... 6.AppImage

The app has been fairly well tested on each platform, but as always there will probably be bugs or enhancements that people would like to see addressed. If you do come across anything, please raise an issue at: https://github.com/noisymime/SpeedyLoader/issues
By noisymime
#31746
RobJ wrote: Fri Feb 01, 2019 12:52 am Does SpeedyLoader apply the compiler optimisation (the O3 change) recommended on the wiki?
Yep! In fact, it downloads binaries that I have applied a few other, more painful to setup, tweaks to as well :D
Overall it doesn't make much difference, but it's nice to have everyone getting the best version
User avatar
By RobJ
#31747
Sounds great!
I found myself double checking what I was doing against the wiki every time I did an update, glad to here there's one less thing I can stuff up ;)
Vr Conditioner Noise when cranking

you could set 'skip revolutions' to 3, then it wo[…]

I uploaded logs and last tune and dyno plots look[…]

Hi, I am trying to assign Signed values to the x-a[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Still can't find what you're looking for?