Any general discussion around the firmware, what is does, how it does it etc.
By pkagiantas
#52945
Tjeerd wrote:updated the opening post again with the latest info for now.
have you removed the datalogger?
I updated my test board with the latest firmware from your git and loaded the ini but i cant see the onboard datalogger option on TS
By NickZ
#52948
the latest STM32 version is broken in a number of ways, serial 2 doesn't work either. But nobody is really interested in fixing it as i have asked about 3 times now.
User avatar
By pazi88
#52949
NickZ wrote: Tue Sep 07, 2021 4:53 am the latest STM32 version is broken in a number of ways, serial 2 doesn't work either. But nobody is really interested in fixing it as i have asked about 3 times now.
*correction: not enough free time at the moment to figure it out ;)
By Tjeerd
#53043
pkagiantas wrote: Mon Sep 06, 2021 7:44 pm
Tjeerd wrote:updated the opening post again with the latest info for now.
have you removed the datalogger?
I updated my test board with the latest firmware from your git and loaded the ini but i cant see the onboard datalogger option on TS
yes i did, because i thought it wasn´t working for anyone but myself. So no one was using it. During the winter months i might have some time to add and improve this again.
By pkagiantas
#53044
Tjeerd wrote: Sun Sep 12, 2021 1:42 pm
pkagiantas wrote: Mon Sep 06, 2021 7:44 pm
Tjeerd wrote:updated the opening post again with the latest info for now.
have you removed the datalogger?
I updated my test board with the latest firmware from your git and loaded the ini but i cant see the onboard datalogger option on TS
yes i did, because i thought it wasn´t working for anyone but myself. So no one was using it. During the winter months i might have some time to add and improve this again.
it was one of the main features that drive me to the stm boards
i used it on a bike that you cant datalog with a laptop and drive

it worked for some time but it after some updates it started to datalog and throw an error on the first 10s or so
went back to dataloging with a pi zero w and a 4.3c as a board
By pani
#53049
Downloaded the latest from your git and I get the following when try to compile before uploading. Can you help?

Thanks
Attachments
Screenshot (22).png
Screenshot (22).png (193.67 KiB) Viewed 6980 times
  • 1
  • 18
  • 19
  • 20
  • 21
  • 22
  • 30

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?