[Lucas@AirLift]

Hello all, I was wondering if Rally Style ALS will be added to speeduino in the near future. Now before anyone says anything about you will destroy your engine and whatnot, I know the risks. I have been running the MS ALS for some time and if it is tuned properly for your setup you will have no issues. I know I could pull timing and add fuel in certain columns on my maps, but the MS implementation of ALS works wonders and is far more advanced than just fudging my maps. Plus you have the ability to enable and disable ALS based on conditions like engine temp which is great.

Here is some video of the MS ALS in action in my 1JZ swapped IS300. First video is testing at idle with a mild throttle kick, second is in car drifting footage from Road Atlanta in 2016 or 17 and you can hear it working on when I lift off the throttle. BTW I ran this at every event I drifted for 4 years on a bone stock turbo and engine with no failures

https://youtu.be/TvXzLk2lW3Y

https://youtu.be/6nqZ54BXnu8

[Fera]

megasquirt rally style antilag is not good
i make my own code for speeduino. rally style anti lag based on motec efi system ..M800 . and M142 i work with this efi system
using nitrous system for als control 2 stages and VVT for Drive By Wire ( DBW has a separated external system)
the als idle is for control rpm limit of engine with 20 or 30% of throttle for control air bypass without air valve ( real Rally Style )
the output on rally style anty lag ( previously nitrous system) can use for control air valve or for control Fresh air valve)
the als system has a fixed fuel add and fixed timming retard ( another option is use 2nd fuel map & 2nd ign map) say goodby to eth% system)
the modification of features is for mega 2560
I am trying to start using another microprocessor. and return nitrous system vvt and eth% But I still can't decide which one. maybe teensy

check this post
https://www.msextra.com/forums/viewtopi ... 91#p580991

[Bart??omiejKubiak]

Fera can u share your code for antilag ?

[Mahmoud]

Anyone got a code for anti-lag?!

[frazzledvary]

megasquirt rally style antilag is not good
i make my own code for speeduino. rally style anti lag based on motec efi system ..M800 . and M142 i work with this efi system
using nitrous system for als control 2 stages and VVT for Drive By Wire ( DBW has a separated external system)
the als idle is for control rpm limit of engine with 20 or 30% of throttle for control air bypass without air valve ( real Rally Style )
the output on rally style anty lag ( previously nitrous system) can use for control air valve or for control Fresh air valve)
the als system has a fixed fuel add and fixed timming retard ( another option is use 2nd fuel map & 2nd ign map) say goodby to eth% system)
the modification of features is for mega 2560
I am trying to start using another microprocessor. and return nitrous system vvt and eth% But I still can't decide which one. maybe teensy

check this post
https://www.msextra.com/forums/viewtopi ... 91#p580991

Can you PM me the anti-lag code?