- Wed Oct 13, 2021 2:49 am
#53571
Hi guys, there would be the possibility of adding a table similar to the one for the boost control but for the idle valve, this would be the rpm on the x axis and the map load on the y axis. stop when the rpm drops.
currently i am already using this method but with the boost control table for a 2 wire honda obd1 iacv valve combined with the iacv output by default they are set to the same frequency of 500hz. It would be very useful if this table could be added because we could have more control over some iacv that do not work so well with the pid.
currently i am already using this method but with the boost control table for a 2 wire honda obd1 iacv valve combined with the iacv output by default they are set to the same frequency of 500hz. It would be very useful if this table could be added because we could have more control over some iacv that do not work so well with the pid.
- By Piwel
- By pazi88