For anything you'd like to see added to Speeduino
User avatar
By Eric H
#43793
Is there an easy way to get an oil temperature gauge?
There doesn't seem to be a way to configure an extra temperature gauge.
It's the last piece of the current dashboard that isn't integrated into the ECU.
Future uses could be rev limiting and boost limiting based on oil temps. No caning the car until it's warmed up!
By dazq
#43806
If it's not already available an additional local input can be added via the aux in setup. The wiki explains how to do that, and a post on here explained how to make a custom gauge too.
User avatar
By Eric H
#43816
Dazq,
It's one thing to get a voltage reading on the pin, that's trivial.
I want the Steinheart-Hart calcs running on the ECU like the other thermistor temperature sensors.
I want the datalog to have the temperature in it, not the voltage.
By dazq
#43829
Eric H wrote: Sat Jun 20, 2020 4:46 pm Dazq,
It's one thing to get a voltage reading on the pin, that's trivial.
I want the Steinheart-Hart calcs running on the ECU like the other thermistor temperature sensors.
I want the datalog to have the temperature in it, not the voltage.
That's not exactly what you first asked for!
Gauges can be created in TS that show the correct unit and that data could be added to the data log list in the ini if you wanted to.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?