For anything you'd like to see added to Speeduino
By maisdc
#34737
Hello, I would like a request for functionality or maybe some info on how to solve this problem without having this function. My vehicle has idle speed of 950rpm, but the AE function only works after 1000rpm, which causes a momentary acceleration failure if my engine swings below 1000rpm, or I have to let the idle well above 1000rpm to avoid this oscillation. I wish I could put values ​​below 1000 or let me know if there is an alternative for the AE to work even if the engine drops to around 800rpm for example. Thank you.
Last edited by maisdc on Wed May 15, 2019 5:01 pm, edited 1 time in total.
By lsdlsd88
#34738
Not sure why anyone would want dfco near idle speed? I normally enable it at least 500 rpm above idle
By maisdc
#34739
Not DFCO, is enrichment in acceleration, which in the previous firmware had no rotation option and in the current starts at 1000rpm and ends at 10,000rpm.
Last edited by maisdc on Wed May 15, 2019 5:02 pm, edited 1 time in total.
By lsdlsd88
#34742
ooh ok. I'm not sure AE is essential for a working engine, try to retune your VE particularly in the high load/low rpm area, target 12:1 it will not hesitate even without any AE if you press the throttle gently..
User avatar
By PSIG
#34751
AE should be able to function at any running rpm. Please post your MSQ (tune) file, and a log of the problem.

David
By maisdc
#34755
In the previous version of the firmware I did not have the Taper Start RPM and Taper End RPM option that appears in the Tuner Studio with the latest firmware version, and Taper Star RPM starts at 1000RPM, and I can not lower this value, this setting is not to set limits when acceleration enrichment works. How do I send the files?
By maisdc
#34756
lsdlsd88 wrote: Wed May 15, 2019 7:16 pm
maisdc wrote: Wed May 15, 2019 5:44 pm But that would lead to high consumption.
how long do you stay in those cells lol :D
The vehicle is of daily use, conventional use, is not for use in competitions, so it is constantly idling at every corner, stop, other intervention that may occur on the road.
By lsdlsd88
#34757
maisdc wrote: Wed May 15, 2019 7:19 pm The vehicle is of daily use, conventional use, is not for use in competitions, so it is constantly idling at every corner, stop, other intervention that may occur on the road.
but i never said to idle at 12:1... I meant only on those cells that you visit for a split second when blipping the throttle
blitzbox

Is the BlitzBox available for purchase from anywhe[…]

1974 Mercedes W115 230.4

...and spent a month laid up unwell with something[…]

Did it not have an ECU? modern diesel engine man[…]

1-Wire temp sensor

A UART can also be used: https://www.analog.com/en[…]

Still can't find what you're looking for?