For anything you'd like to see added to Speeduino
#31933
Perhaps drive the one injector with all four channels, setting each firing by angle in Settings > Injector Characteristics > Injector Close Angle > Individual Channel Setting. Of course, your Req_fuel would have to be adjusted in order to only permit each channel to fire 1/4 of the available time. This is just an idea that might work. Injector control may be difficult at low loads, and very limited in flow at high loads.

David

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?