For anything you'd like to see added to Speeduino
User avatar
By Lenny
#29335
Hi all,
would it be a lengthy and painful procedure to add and configure a 2 tooth trigger for a v2 engine?
it's a weird one
Image

or just grind the old one off and start fresh with 12-1 or something like it.
I would be using no2c for spark, pickup sensor is 2 wire inductive
User avatar
By Lenny
#29338
ok, what is the minimum for sequential spark just on crank sensor?
By panpan
#29342
Virago has inductive coils and VR sensor and two pips on the outside of the flywheel. It runs wasted spark but Ignitech do a programmable ignition system for these for around $136+taxes, so I'm not sure why OP is looking at Speeduino, unless he wants EFI. :)
User avatar
By Lenny
#29344
theonewithin wrote:
Tue Oct 02, 2018 12:28 pm
Could you add more details of the engine/bike?

Like exact year and model?
Yamaha Virago 1995, 535cc engine V2 70°
User avatar
By Lenny
#29346
panpan wrote:
Tue Oct 02, 2018 12:46 pm
Virago has inductive coils and VR sensor and two pips on the outside of the flywheel. It runs wasted spark but Ignitech do a programmable ignition system for these for around $136+taxes, so I'm not sure why OP is looking at Speeduino, unless he wants EFI. :)
My stock CDI died, and I just don't like readily available things, there is no adventure in that, too simple, engineers don't do simple :D
User avatar
By Lenny
#29347
I will make a build thread when I receive NO2C and begin working on it. Lets consider this matter closed for now
E190 2.3 8V FUEL ONLY

Head cover painted special heat color

I'll add that not only must VR polarity be corre[…]

The term you're looking for is I/O Expander. Here'[…]

That's weird. Even if my fork is somehow corruptin[…]

Still can't find what you're looking for?