For anything you'd like to see added to Speeduino
By runesm
#28162
Feature request:
A simple form of afr safety, so you dont blow your engine if a pump or an injector fails.
Setup would be something like:
1: Above X kpa
AND/OR
2: Above X tps
IF
3:Afr not below X
IN
4: X seconds
DO
Cycle some ignition cuts so the driver feels somethings wrong AND/OR turn of boost control/lower boost
User avatar
By PSIG
#28310
I would suggest at least one optional response be a simple activation of a selectable output or pin. With that I can do any number of things, from cutting ignition outputs, to dumping boost, to simply flashing a dash light or honking the horn :o :lol:, and many more actions. An override input would also be nice to stop the response in order to allow normal or reasonable limp-home, e.g., if the O2 sensor dies or other error.

David
Ignition Angle doubled?

+1, distributor is being used as crank position, s[…]

Dude, use whatever you think will work best, or wh[…]

It has been done more than a few times, there wa[…]

Peugeot 205 rallye

Controller egt and oil temp

Still can't find what you're looking for?