[Mykk]

I know you already know, but I'll post it for posterity. AFR limits

[noisymime]

OK, I'm calling this one complete. Everything has tested out correctly on my end, but please give it a go once the June firmware is dropped later today.

[civic_r87111]

What would it take to add a 3rd stage to this? Or possibly even shot by gear? I'm trying to run a 50 in 2nd, a 100 in 3rd, and then both in 4th for a 150 shot. I'm not planning on using the ecu to engage the solenoids just to compensate the fuel and timing. I have wires ran to the ecu for trigger inputs for each stage already, just don't have the setting in the software to set it up right. Any help is appreciated, thanks.