Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For anything you'd like to see added to Speeduino
User avatar
By andrey
BMW 760 e65/e66 had separate electrics boxes just to drive direct injectors - those were the early days of GDI. Each v12 engine was running using two of these blocks - each box controls 6 lowZ injectors. Overall they had 5 separate control units to server that v12 engine.

We got one of these boxes - bosch 7506280 from BMW 760 - to click a GDI injector. Two wires to GND, two wires to +12v. Low-side control signal - and it's alive :) Next step is hooking this to an oscilloscope.


Here are wiring diagrams for three Ch(203 or 209) […]

Ok, you can't bypass the 5v regulator, it must hav[…]

Modified 3 cylinder

You should read up on how OEM go about shutting do[…]

Gauge output options? (0.4.4C Board)

At the moment only teensy natively supports th[…]

Still can't find what you're looking for?