For anything you'd like to see added to Speeduino
By dazq
#44515
Yadmaan wrote:
Wed Jul 29, 2020 9:27 pm
Hi. Plz help me. Forced.
I have eiton super charger with electric bypas valve . It is a electric throtlle with 6 wire . Can i controling bypas valve with speeduino boost control for control booost and bypas air in time closed throttle? Pwm signal
Possibly better to use the vvt output to pwm drive the bypass valve based on map and rpm
By Yadmaan
#44545
Thankful. What difference does it make whether I use boost or vvt. And that the pwm wave that is produced can control the bypass valve and start the electric motor
from zero to 90 degrees ...

@theonewithin Gpio Mini or dxcontroller I mean. […]

Hey all, Working perfectly now, I installed windo[…]

The voltage between negative coil terminal and gro[…]

you might have the coils not wired to ignition out[…]

Still can't find what you're looking for?