Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By Tripple-F
#38697
Hi David,

at the moment I cant´t check it, but there is only a problem, when you set launch control OFF but Flatshift ON. Then the pullup resistor is disabled.
User avatar
By PSIG
#38703
Tripple-F wrote:
Mon Oct 21, 2019 9:10 am
Hi David,

at the moment I cant´t check it, but there is only a problem, when you set launch control OFF but Flatshift ON. Then the pullup resistor is disabled.
Ah, OK I will try that when I get back next week. For now, please post it as a new issue on GitHub Speeduino for others to check.
Modified 3 cylinder

Yes, I understand there needs to be modifications […]

L TWIN ducati vr signal need help

As above a tooth log would be useful. Which condi[…]

In my experience the problem only usually occurs[…]

3rz-fe turbo. help with iac valve

READ THE WIKI. https://wiki.speeduino.com/en/conf[…]

Still can't find what you're looking for?