- Mon Jan 17, 2022 8:35 pm
#54768
As shown in the following pictures, on the latest firmware releases, if we attempt to change large ares of the maps with < > cursors on the keyboard, a protocol error appears, and a reset of the bard is required in order to reinitiate the com.
This was not happening with the previous firmwares, attempt was done on 3 different genuine arduino mega boards, and 2 different usb cables.
Tests were done after a fresh install with speedyloader of the latest 202202 firmware, with relative ini file, and base tune
This was not happening with the previous firmwares, attempt was done on 3 different genuine arduino mega boards, and 2 different usb cables.
Tests were done after a fresh install with speedyloader of the latest 202202 firmware, with relative ini file, and base tune
Attachments
Comunication error Speeduino v1.png (416.93 KiB) Viewed 3822 times
Comunication error Speeduino v2.png (466.27 KiB) Viewed 3822 times