Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By boris.h
#51571
Hi all
Following the issues I found, this one is tricky for me:
My idle valve worked before (pwm, 2 pins, pinout OK) but since today if I activate idle valve, before cranking the valve activates the injectors (led and I can hear them). Any idea, something to check as a common point with the idle valve and the injectors?
Thanks!

It looks like you have a fuel supply issue. readin[…]

Will this have an updated version about this featu[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?