Random injector, fuel pump activation, idle valve before start keaps fuel pump active..

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50203

By jonbill - Mon May 10, 2021 11:10 am

- Mon May 10, 2021 11:10 am #50203

Its not the same thing..

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50204

By Liukas1992 - Mon May 10, 2021 11:22 am

- Mon May 10, 2021 11:22 am #50204

jonbill wrote: ↑Mon May 10, 2021 11:10 am Its not the same thing..

Still think could be problem here?

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50205

By Liukas1992 - Mon May 10, 2021 2:23 pm

- Mon May 10, 2021 2:23 pm #50205

Made some tests on a bench with two speeduino boards. One I am having problems is reacting when pluging in to pc, other one is not.
Also in a car when ignition is switched on, after ~1s idle valve activates and injector LED's get dimly lit. maybe some component got bad or something.
https://www.youtube.com/watch?v=V8f6621_0xU

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50206

By Liukas1992 - Mon May 10, 2021 4:56 pm

- Mon May 10, 2021 4:56 pm #50206

issue found, faulty speeduino board or component. Wired other speeduino ecu on same arduino board and everything works fine.

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50203

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50204

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50205

Re: Random injector, fuel pump activation, idle valve before start keaps fuel pump active..#50206

m52 pnp v2.2 board weird lag spikes while in boost.

BMW E23 M30B28

1979 Chrysler Scorpion draw through carby conversion (4G54 + Garrett T3 + Stromberg CD175

Mazda 3 with Honda V6 J30 and speeduino for J30 ECU in parallel with existing ECU