- Mon Apr 19, 2021 2:24 pm
#49699
Have been working on getting jeep2000 trigger working, 18-2-2-2 trigger wheel.
rpm won't go above 299rpm doesn't matter what speed the trigger is, But any thing above that, sending the trigger pulse and starting the ecu all seems ok and the RPM will go up as it should. tested on a car and on a stim with the same results, Composite log is perfect, but trigger log is a different story. If i select another trigger input in TS while running the jeep2000 pattern the ECU rpm will jump up and behave normally (kind of as the trigger pattern is wrong for it)
composite log
trigger log
will not go higher in rpm even though trigger input is 3920rpm, will stay at 299rpm
RPM's go up and down if the trigger is running then powering up the ECU
But rpms don't match
rpm won't go above 299rpm doesn't matter what speed the trigger is, But any thing above that, sending the trigger pulse and starting the ecu all seems ok and the RPM will go up as it should. tested on a car and on a stim with the same results, Composite log is perfect, but trigger log is a different story. If i select another trigger input in TS while running the jeep2000 pattern the ECU rpm will jump up and behave normally (kind of as the trigger pattern is wrong for it)
composite log
trigger log
will not go higher in rpm even though trigger input is 3920rpm, will stay at 299rpm
RPM's go up and down if the trigger is running then powering up the ECU
But rpms don't match