Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By NickZ
#49699
Have been working on getting jeep2000 trigger working, 18-2-2-2 trigger wheel.
rpm won't go above 299rpm doesn't matter what speed the trigger is, But any thing above that, sending the trigger pulse and starting the ecu all seems ok and the RPM will go up as it should. tested on a car and on a stim with the same results, Composite log is perfect, but trigger log is a different story. If i select another trigger input in TS while running the jeep2000 pattern the ECU rpm will jump up and behave normally (kind of as the trigger pattern is wrong for it)

composite log

Screen Shot 2021-04-20 at 12.08.19 am.png
Screen Shot 2021-04-20 at 12.08.19 am.png (86.21 KiB) Viewed 2457 times
trigger log

Screen Shot 2021-04-20 at 12.09.06 am.png
Screen Shot 2021-04-20 at 12.09.06 am.png (242.98 KiB) Viewed 2457 times
will not go higher in rpm even though trigger input is 3920rpm, will stay at 299rpm

Screen Shot 2021-04-20 at 12.09.38 am.png
Screen Shot 2021-04-20 at 12.09.38 am.png (396.73 KiB) Viewed 2457 times
RPM's go up and down if the trigger is running then powering up the ECU
But rpms don't match

Screen Shot 2021-04-20 at 12.11.11 am.png
Screen Shot 2021-04-20 at 12.11.11 am.png (501.66 KiB) Viewed 2457 times
User avatar
By Mr_Hypnotic
#49723
That seems weird. I am following this because I have a few Jeeps with this trigger pattern that need some Speedy.
By NickZ
#49733
there is a part in the trigger code for the jeep2000 trigger to do with the filtering when the engine isn't running to cranking. Decoders aren't my thing, so maybe someone can fix it and explain better.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?