Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By Adam_86
#47908
The engine protection On/Off and boost limit On/Off indicator is not reset to off after Boost cut protection. After a boost cut it stays on.
It needs a new line in the code in engineProtection.ino to reset the indicators to off at line 36

Image

Image
Jaguar V12 second edition

I believe more and more on a software issue. Speed[…]

You should be able to use PWM using the VVT tabl[…]

retroject flooding

sounds like you might have some pin misconfigurati[…]

As above. Check the schematic whenever you are uns[…]

Still can't find what you're looking for?