Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By HugoW
#47348
Hi,

Sorry to post here, I tried GitHub but it doesn't like me, I guess...

Maybe I'm just doing something wrong but the facebook group doesn't clear the issue either, so here we go with my first issue report. I'm running firmware 202012, Miata 1.8 VVT, VVT on closed loop.

I'm messing with (and failing at) tuning the VVT on my Miata NBFL. I have three gauges in my dash for this:
VVT1 duty
VVT1 angle
VVT1 target angle
Those three are also available for VVT2, but I only have VVT on the intake cam.

So I drove around today logging the run but the numbers haven't been registered. On the dash I can clearly see them moving while driving. I also notice I can choose VVT1 and VVT2 for farious gauges on the dash when making the gauges, but in the log there is only one VVT type. Do I have wrong settings or do the available gauges (settings) not match the logging profile available?

Image

Image

Image

Cheers,
Hugo

Will this have an updated version about this featu[…]

See my earlier post . The Base Tune sets t[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?