- Mon Dec 28, 2020 11:39 am
#47334
Problem with the programmable outputs, I have firmware 202012 I wanted to use the programmable outputs using the pin6 of the arduino (since it is from the iac 2 and I am not using it), I need this output to work by rpm but there is no case that it turns on .. Not even in tunerstudio it appears that it works .. in firmware 202008 it works without problems ... to solve the problem quickly use the VVTI output to make it work ... but I have this output reserved for something else.
Thanks a lot
Thanks a lot
Attachments
(74.11 KiB) Downloaded 303 times