Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By runis6
#45395
Hello! So i guess from newest update have some issue with RPM limiters. Is not working Launch Control at all, and is not working Engine Protection RPM. So in the TunerStudio the LaunchHard warning is showing when it needed to be activated but the Arduino is doing nothing. I think some problem is in speeduino.ini file, some mistake or something. I also added video below... Also add the tune file. Thanks!

https://youtu.be/ExXaAjBuqxQ

Reinis!
Attachments
(70.63 KiB) Downloaded 261 times
Honda J30 running

Okay, we now need to talk about violence and backg[…]

Vr Conditioner Noise when cranking

I checked and my sensor is not loose. Trigger whee[…]

It looks like you have a fuel supply issue. readin[…]

Will this have an updated version about this featu[…]

Still can't find what you're looking for?