Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By theonewithin
#47571
Check logs for sync loss.

Also post the logs when this happened along with the tune too.

There are a few people running 5 cylinders without issues.

Also try clearing out firmware and loading it again to see if perhaps there is some hidden corruption.

Had it running for a short period again. Same as […]

Ok, here is the first version of the adapter plate[…]

Ignition Angle doubled?

don't load your old tune in case it is corrupted[…]

Yes, totally wrong setting. Slight noise in TPS ca[…]

Still can't find what you're looking for?