Speeduino

Hi
I have arduino MEGA2560 &speeduino bord v0.4.3c.

I want a speedy lorder firmware.mathing to v0.4.3c

I was installed Latest firemware,then no matchi v0.4.3c…

Please help me.

you should select speeduino 0.4 as board layout in engine constants

thank you for your reply.

excuse me.
I can't understand your advice.
what does mean'engine cpnstants'?

I want to installe firmware by speedy Lorder for speeduino v0.4.3c.

regards.

You need to use tunerstudio to configure the tune.

https://wiki.speeduino.com/en/home

TakahiroHiguchi wrote: ↑Fri Feb 03, 2023 2:24 pm thank you for your reply.

excuse me.
I can't understand your advice.
what does mean'engine cpnstants'?

I want to installe firmware by speedy Lorder for speeduino v0.4.3c.

regards.

You don't install a firmware for a specific board or MCU type. The firmware release is the same for all. You select your board type and MCU type in tunerstudio. Please see the wiki linked to in above reply

Thank's everyone reply.

Maybe I'm gonna be ok.

I tryed installe one older speedyloader(202204).
Then Tunerstudio muchi with speeduino v0.4.3c.

I guess speeduino v0.4.3c needs sumething fit file.

Everyone good luck!