Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For anything related to these forums itself including moderation, suggestions, artwork etc.
#2151
OK, so I think things have definitely reached the point where it would be good to have a couple of extra moderators around the forums to keep an eye on things when I'm not around. There's a few regulars about the place who have casually offered in the past, but I thought that to be fair I'd throw the doors open to see who is interested. I can't promise anything and I think that limiting this to about 2 moderators is probably going to be best, so please don't be disappointed if you don't get picked. There will no doubt be more people required down the track.

As a secondary thing, the forum could really use a bit of a redesign or just some basic artwork to change it up from the bog standard phpBB theme. I'm the first to admit that I suck really badly at anything to do with artwork (The logo on the top left of http://speeduino.com/wiki/index.php/Speeduino is really the limits of my ability) so if anyone feels like throwing together a logo or any other sorts of artwork to dress things up a bit, that would be amazing!

So, if you're interested in either (or both) of the above things, just reply here and I'll be in touch.
#2156
I will throw my cap in here, I am usually always in this forum about 4-5 times a day, usually first thing in the morning and last thing i check before i go to bed. I am not that good with graphics and art but i can help keep the forums running smoothly.
#2167
As an idea for a logo, what about something similar to the Arduino logo?
Say, two "infinity" symbols side by side, each stylized to look like two wheels & tires, one with an automotive like profile above it and the other a motorcycle, then stylized "SPEEDUINO" text spanning beneath them with a slight side-to-side motion blur that trails off to the right.
#2184
cx500tc wrote:As an idea for a logo, what about something similar to the Arduino logo?
Say, two "infinity" symbols side by side, each stylized to look like two wheels & tires, one with an automotive like profile above it and the other a motorcycle, then stylized "SPEEDUINO" text spanning beneath them with a slight side-to-side motion blur that trails off to the right.
You mean something like....
Attachments
stikers-Speeduino.png
stikers-Speeduino.png (10.1 KiB) Viewed 3838 times
#2186
noisymime wrote:OK, so I think things have definitely reached the point where it would be good to have a couple of extra moderators around the forums to keep an eye on things when I'm not around. There's a few regulars about the place who have casually offered in the past, but I thought that to be fair I'd throw the doors open to see who is interested. I can't promise anything and I think that limiting this to about 2 moderators is probably going to be best, so please don't be disappointed if you don't get picked. There will no doubt be more people required down the track.

As a secondary thing, the forum could really use a bit of a redesign or just some basic artwork to change it up from the bog standard phpBB theme. I'm the first to admit that I suck really badly at anything to do with artwork (The logo on the top left of http://speeduino.com/wiki/index.php/Speeduino is really the limits of my ability) so if anyone feels like throwing together a logo or any other sorts of artwork to dress things up a bit, that would be amazing!

So, if you're interested in either (or both) of the above things, just reply here and I'll be in touch.
If you don't mind me saying, I would consider the people that have supported the project from the very start and give them priority. I am already a moderator and manager of several engineering forums, I am also running the family business which is by far no where easy since family feud is a daily occurrence and at the very last of the long tedious list, I'm also currently beating cancer for the fifth and final time.

I'll be more than happy to help anyway I can, I have lots of resources and I'm having fun so no harm there.

But due to my pending medical activity, I appreciate the open offer but must decline.
#2216
edc_atl wrote:
cx500tc wrote:As an idea for a logo, what about something similar to the Arduino logo?
Say, two "infinity" symbols side by side, each stylized to look like two wheels & tires, one with an automotive like profile above it and the other a motorcycle, then stylized "SPEEDUINO" text spanning beneath them with a slight side-to-side motion blur that trails off to the right.
You mean something like....

This looks terrific! Do yu have if in a larger copy at all?

You've been a huge help in so many ways to the project, so thanks for everything you've done. Best of luck with everything around your treatment too.
#2217
noisymime wrote:
edc_atl wrote:
cx500tc wrote:As an idea for a logo, what about something similar to the Arduino logo?
Say, two "infinity" symbols side by side, each stylized to look like two wheels & tires, one with an automotive like profile above it and the other a motorcycle, then stylized "SPEEDUINO" text spanning beneath them with a slight side-to-side motion blur that trails off to the right.
You mean something like....

This looks terrific! Do yu have if in a larger copy at all?

You've been a huge help in so many ways to the project, so thanks for everything you've done. Best of luck with everything around your treatment too.
I know I'm not edc_atl, but how's this:
speeduino.png
But I'll let him make the call.
#2223
Thanks guys, just something I threw together but it is getting a lot better!

How about the Arduino infinity sings a the windows or so.
Also, it looks more like a station wagon, need to cut down the size a bit.

Outstanding :D
#2224
The 'infinity' logo has a very inconvenient Trademark symbol with it. Though it would work until somebody cared. ;)


Image
Last edited by PSIG on Sat Oct 03, 2015 11:22 pm, edited 1 time in total.

Yes, but voltage is limited one some, such as the […]

Second injector bank

there's a section on staged injection in the wik[…]

Injector dead time tester

That makes poor accuracy. You should check this[…]

EMI while cranking

Well in a last ditch effort and using scrap parts […]

Still can't find what you're looking for?