Statistics: Posted by soultron — Thu Mar 28, 2024 2:47 am
Statistics: Posted by Jason Rouillard — Thu Mar 28, 2024 1:11 am
Statistics: Posted by PSIG — Wed Mar 27, 2024 6:52 pm
Statistics: Posted by PSIG — Wed Mar 27, 2024 5:42 pm
Statistics: Posted by PSIG — Wed Mar 27, 2024 3:56 pm
Statistics: Posted by PSIG — Wed Mar 27, 2024 3:47 pm
Statistics: Posted by PSIG — Wed Mar 27, 2024 3:33 pm
there is an entry inTrue, but it should work, and is just waiting for someone with a J30 to confirm it. That could be you, and if all works well, it is no longer in-development. We have a few wizards that are really good with decoders that can quickly alter if necessary to make it right; but again we need that real-world somebody hands-on to verify it. <shrug>
https://wiki.speeduino.com/en/decoders
for the J30 pickup sensor but it's "in development"
https://wiki.speeduino.com/en/decoders/HondaJ30J32v2
Statistics: Posted by PSIG — Wed Mar 27, 2024 3:31 pm
Statistics: Posted by lovosal — Wed Mar 27, 2024 10:52 am
Statistics: Posted by AlexE — Wed Mar 27, 2024 8:36 am
Statistics: Posted by Kinetic Research — Wed Mar 27, 2024 4:38 am
Statistics: Posted by Kinetic Research — Wed Mar 27, 2024 4:06 am
Found it. Fuel decel enleanment set to zeroAppreciate you checking. ok, That's a parameter I didn't set. I'm staying out of anything complex till I have it right, so much like the Injector Voltage Correction from a previous post, I'm not sure how I missed that.
Statistics: Posted by soultron — Wed Mar 27, 2024 3:38 am