× You're looking at the old version of the wiki! As of January 2020, all pages have been migrated to the new site at: http://wiki.speeduino.com


Jump to: navigation, search


77 bytes added, 2 years ago
Test Input Hardware
Whilst test mode is NOT enabled you can observe the current state of an input pin on the "STATE" button for the appropriate input.This will be black when active(high) and grey when not(low).When test mode is enabled this feature does not work.
To start overide testing click on "Enable test mode" . The Input ports that can be tested will then be unGreyed and can be clicked on/off. After testing either click "Stop test mode" or just close the window. Any Inputs overriden will be retuned returned to their current true input state. [[File:Test_input_hardware.jpg|800px|center|thumb|Hardware Output Test ]]
=== Creating new board layouts/pin configurations ===

Navigation menu