[noisymime]

Per the subject, because things are still changing so much in the lead up to a actual release, anytime you grab some new code from github, whether it be one of the zips or just a fresh pull, make sure you reload the speeduino.ini file from the reference directory into your Tuner Studio project.

To do this, just go the File->Project->Project Properties, check the box for 'Other / Browse' and then select the speeduino.ini file that is in the codes reference directory.

[MoysieWRX]

Hey Josh,

Just a heads up to let you know that the latest firmware (14 hours old) is broken and won't open with tuner studio, even with the latest ini.
I have started tracking down the fault and hopefully should have the answer soon, but basically what i have found so far is that the new decoder code is the culprit.

[noisymime]

Thanks for the heads up. Will check it out shortly.

[MoysieWRX]

Hey Josh,
Found the problem and updated the code on Github if you can check it out at your leisure and merge the change

[noisymime]

Awesome work! I'm not going to be home for another hour or so to test, but does it need the crank angle function set in there too?

[MoysieWRX]

Although it doesn't seem to be causing any issues at the moment, probably best to set the default crank angle function too.
I'll add it into my github patch to be merged

[Slydit]

where have the base maps gone?
ive upgraded to 202207.1 (but custom firmware to allow N02C sequential)
and i cant manually download a basetune...
where are they now?
github seems to only allow downloading as a text file????

[LPG2CV]

Try Speedyloader