- Sat Jan 20, 2024 3:17 pm
#66794
I have one of 4 leds flashing now, after turning it around
From google...
Square pads often indicate pin 1 or the positive side of a diode/cap whatever. However, there is no "rule". It's really up to whoever designs the pcb.
LED's the long leg is positive
Silkscreened on the bottom of the NO2C board, "insert short leg into square pad"
"However, there is no "rule". It's really up to whoever designs the pcb. "
THANKS ALL
From google...
Square pads often indicate pin 1 or the positive side of a diode/cap whatever. However, there is no "rule". It's really up to whoever designs the pcb.
LED's the long leg is positive
Silkscreened on the bottom of the NO2C board, "insert short leg into square pad"
"However, there is no "rule". It's really up to whoever designs the pcb. "
THANKS ALL