[pulsar2121]

I recently purchased the Speeduino v0.4.3d PCB and all of the components listed in the BOM. I have been following along with the board assembly instructions provided in the Speeduino Manual. First off, I noticed that both the written instructions and the YouTube video appear to be for an earlier version of the PCB. For example, on step 3, it says that C14 and C16 are polarized. On my board, it is actually C17 and C21. Minor complaints aside, I have been able to work around the outdated instructions and figured out what to do.

However, I have hit a wall at steps 4 and 5. After going through all of my components from DigiKey and double-checking the BOM that is provided on GitHub, I have found that all of the jumper headers and Arduino pins are missing from the BOM. Also, upon checking the digitally rendered image on the Speeduino v0.4.3d PCB page, I have found that the two position screw terminal for the incoming 12V power is also missing from the BOM.

Could someone please help me with finding these missing components so I can order them and continue my project? Thanks in advance!

Resources:
Speeduino v0.4.3d PCB - https://speeduino.com/shop/home/18-spee ... -hole.html
BOM - https://github.com/speeduino/Hardware/b ... x?raw=true
board assembly instructions - https://wiki.speeduino.com/en/boards/V04
YouTube video - https://www.youtube.com/watch?v=-UoFbUasFGY

[Jmedellin21]

I just soldered a bead from one pad to the other for the jumpers. You want to look for 2.54mm Dupont connectors for the aduino pins, I picked a kit up off of amazon since they are good connectors for prototyping as well. The power connector on older boards is a 5mm pitch pcb mount terminal connector. Its a screw-style connector that lets you insert each individual wire, but you can use any connector as long as the hole spacing is correct. Ill leave a few amazon links for the connectors I've mentioned. If you dont want to stretch a bead of solder out for the jumpers, you can use the legs you cut off the other components or any solid wire that will fit.

[Jmedellin21]

Sorry, forgot the links on the last reply.
Power Terminal:
https://www.amazon.com/BOJACK-Terminal- ... atf_m&th=1
Arduino Connectors:
https://www.amazon.com/dp/B0B11RLGDZ?ps ... ct_details