- Thu Nov 23, 2023 2:34 pm
#65933
Hi folks,
for a small pcb project, I wanted to use a blackpill board with a STM32F401CC.
I am able to build the software release 202310 and load it to the board with no errors using VSC and PlatformIO as well as Arduino IDE. Both result in the chip not reporting a Serial Connection via USB and therefore not being recognized by Tunerstudio.
The same approach with a Mega 2560 works like a charm.
Is there anything obvious I have to consider using this MCU?
Cheers,
Michael
for a small pcb project, I wanted to use a blackpill board with a STM32F401CC.
I am able to build the software release 202310 and load it to the board with no errors using VSC and PlatformIO as well as Arduino IDE. Both result in the chip not reporting a Serial Connection via USB and therefore not being recognized by Tunerstudio.
The same approach with a Mega 2560 works like a charm.
Is there anything obvious I have to consider using this MCU?
Cheers,
Michael